Product Introduction-
2440*1220*0.8/1.8/3.0mm Acrylic Mirror Sheets
Material: acrylic,PS polystyrene
Size:2440*1220*0.8/1.8/3.0mm,1830*1220*0.8/1.3mm
Application scenario:Indoor and,outdoor use, stage decoration,dance classroom, gym,and other commercial space wall topdecoration, stage,major commercial space, catering, clothing stores, art galleries, hotels and B&Bs, and other places
Installation Instructions
Install and paste:
1.Use a rolling brush to evenly apply the adhesive on the back of the mirror board and the construction bottom plate(two adhesive surtaces are coated at the same.time),finishthe edge with a brush,andleave itfor more than 15 minutes at room temperature and humidity below 70%(with the adhesive layer slightly on-stick hand prevail).
2.Apply.the structural glue point on the back ofthe mirror plate, and the scraper will scrape the structural glue until it is smooth ànd uniform.
3.At one time, align with the bonding surface, extrude from inside to outside(eliminate bubbles), and compact the mirror plate.
4.After pasting,support the bgttom gf the mirror plate with wooden square,remove it 24 hours ater, and tear oft the protective film on the surtace of the mirror plate.
Cleaning:
There is no scratch-resistant layer on the surface of the ultra-light mirror plate.Attention should be paid to maintenance and cleaning.Dry rags or papertowels can be used for surface cleaning.
Leave feedback about this
You must be logged in to post a review.